Module 1: The Physical Basis of EMC without maths  3 hrs
Module 2: EMC design of cables and connectors (shorter version available for mechanical designers) 2 hrs
Module 3: Filtering for EMC (shorter version available for mechanical designers) 2 hrs
Module 4: Shielding for EMC (longer version available for mechanical engineers) 2 hrs
Module 5: Heatsink design for EMC 1½ hrs
Module 6A: Essential SI, PI and EMC design and layout techniques for PCBs in 2021 1 day
Module 7: Circuit design for EMC (digital, analogue, switch-mode, wired communications) 2 hrs
Module 8: Component selection for EMC  1 hr
Module 9: Suppressing electromechanical devices (switches, relays, motors, sliprings, spark ignition, etc.) 1 hr

Module 10A: Advanced SI, PI and EMC design and layout techniques for PCBs in 2021

1 day
Module 11: Electrostatic discharge (ESD) protection techniques 1 hr
Module 12mil: Suppressing surges & transients on military vehicle DC power supplies, signals, data, control 1½ hrs
Module 12dc: Suppressing surges & transients on vehicle DC power supplies, signals, data, control 1½ hrs
Module 12: Suppressing surges & transients on AC and DC power supplies, signals, data, control 2 hrs
Module 13+14: Reducing emissions of harmonics (= Power Factor Correction, PFC), voltage fluctuations and flicker, into the AC mains 1 hr
Module 15: Improving immunity to poor power quality (dips, dropouts, sags, swells, brownouts and interruptions, etc.) 1½ hrs
Module 16: Adding wireless datacommunications and GNSS to products 2 hrs
Module 17: Overview of common IEC/EN EMC tests (for designers, not testers!)   2 hrs
Module 18: Quick, easy, low-cost near-field (=close-field) EMC measurements with huge benefits in every project stage. This is a complete how-to-do guide including a shopping list for setting up your own facility 2 hrs
Module 19: Protecting semiconductor sensors ½ hr
Switch-mode power converters and motor drives for all applications: design for EMC 1 day
Analogue design techniques for EMC and RF immunity ½ day
Electromagnetic phenomena – where they come from and what they can affect and why (covers 10 phenomena, from 50Hz magnetic fields to GHz radiation)

2 hrs
Assessing an electromagnetic (EM) environment: analyses; calculations; assessments; measurements; existing data  1 hr
Pro-Audio: Audio-frequency shield current induced noise is negligible (as long as it does not flow in the 0V system) ¾ hr
   
   
The Safe Design of Electrical Equipment, and compliance with the LVD or RED, includes IEC 62368-1; Non-CE-marking Safety Directives; Functional Safety 2 days
The Safe Design of Electrical Equipment, and compliance with the LVD or RED, includes IEC 62368-1 but does not include: Non-CE-marking Safety Directives; or Functional Safety 1.5 days

The Safe Design of Electrical Equipment, and compliance with the LVD or RED, includes IEC 62368-1 but does not include: basic safety principles; hazard and risk assessments; Non-CE Marking Safety Directives; functional safety

1.0 day
Techniques and measures for managing Functional Safety and other risks that can be caused by EMI ½ day